Fuel Rail: Specifications

Coalescer Filter Bolts 22-32 Nm (16-23 Lb/Ft)
Engine Fuel Temperature Sensor 21-29 Nm (15-21 Lb/Ft)
Fuel Injection Supply Manifold Bolts 8-12 Nm (71-106 Lb/In)
Fuel Pressure Regulator Bolts 22-32 Nm (16-23 Lb/Ft)
Fuel Pressure Regulator to Coalescer Filter Fitting 38-49 Nm (28-36 Lb/Ft)
Fuel Pressure Relief Valve 6-10 Nm (53-89 Lb/In)
High Pressure Fuel Line Fitting 38-57(*) Nm (28-42(*) Lb/Ft)
Injection Pressure Sensor 21-29 Nm (15-21 Lb/Ft)
Low Pressure Fuel Line Fitting 38-57 Nm (28-42 Lb/Ft)
Power Brake Booster Vacuum Line Bolt 8-12 Nm (71-106 Lb/In)
Throttle Body Spacer Bolts 8-10 Nm (71-89 Lb/In)
42-Pin Connector Bolt 8-12 Nm (71-106 Lb/In)

(*) When tightening the fuel lines, a torque wrench adapter must be used with the torque wrench. The use of a torque wrench adapter will alter the effective torque of the torque wrench being used. To correct the effective torque, a torque multiplication conversion must be used.