Operating Condition - Vehicle Is Not Moving
1. Static operation^ Noise occurs during part/system functioning.
GO to Symptom Chart - Squeak and Rattle.
2. While cranking
1. Grinding or whine, differential ring gear or starter motor pinion noise. GO to Symptom Chart - Engine Noise/Vibration.
2. Rattle. Exhaust hanger, exhaust heat shield or A/C line noise. GO to Symptom Chart - Squeak and Rattle.
3. Vibration. Acceptable condition.
3. At idle
^ Idle noise. GO to Symptom Chart - Idle
Noise/Vibration.
^ Idle vibration or shake. GO to Symptom
Chart - Idle Noise/Vibration.
4. During Gear Selection
1. Vehicle parked on a steep incline. Acceptable
noise.
2. Vehicle parked on a flat surface. GO to Symptom Chart - Driveline Noise/Vibration.
3. Vehicle with a manual transmission. GO to Symptom Chart - Transmission (Manual) and Transfer Case Noise/Vibration.