Power Seat Switch: Service and Repair

REMOVAL






1. Disconnect the battery ground cable.







2. Remove the front seat back adjust handle.
1 Remove the screw.
2 Remove the front seat back adjust handle.







3. Remove the front seat lumbar support handle.







4. Remove the front seat track shield screws.







5. Remove the pushpin on the back of the front seat track shield.







6. Remove the screws on the bottom of the front seat track shield.







7. Disconnect the seat regulator control switch from the front seat track shield.
1 Remove the screws.
2 Disconnect the seat regulator control switch.







8. Disconnect the seat regulator control switch electrical connector and remove the seat regulator control switch.

INSTALLATION
















1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.