Seat - Rear, Three- or Four-Passenger Quick Release Bench

REMOVAL
1. Disengage the detachable safety belt anchor if so equipped.
1 Insert a key or small screwdriver into the slot in the detachable anchor and lift upward.
2 Disengage the detachable anchor tongue end from the detachable anchor.







2. Pull the right and left seat latch handles rearward to move the seat into the full rear position.
^ The left seat latch handle is shown; the right seat latch handle is similar.







3. Disengage the seat latch rod hook ends from the seat latch striker.







4. Lift the right and left latch rod hook ends from the seat latch striker.
5. Remove the rear bench seat from the vehicle.

INSTALLATION
1. Follow the removal procedure in reverse order.
^ Make sure the safety belt is not twisted, then insert the safety belt tongue into the detachable anchor until you hear a "click" and feel the latch engage.