J: LFC 29/DTC C1415 - Incorrect Module Configuration

Normal Operation
The Econoline supplemental restraint system has several model-dependent combinations of air bag modules and belt and buckle assembly pretensioners. There are three part numbers for the Electronic Crash Sensor (ECS) module, depending on the configuration of the vehicle air bag system. The ECS performs a diagnosis of the entire air bag system. If the passenger air bag module is not part of the equipment package, then a connector behind the passenger air bag trim panel will be connected to ground. This provides the ECS with the option coding through Pin C200-20. If the vehicle has been incorrectly equipped, then the ECS will store DTC C1415 in memory and flash LFC 29 (or higher priority code if one exists) on the air bag indicator.

Possible Causes
- damaged wiring.
- incorrect ECS part number installed.
- incorrect equipment installed.

Pinpoint Test Steps:

J1 - J2:

J3 - J5:

J6 - J7:

J8 - J9: