Inspection and Verification (Start Testing Here)

1. Verify the customer concern by operating the turn signal/hazard lamps.
2. Visually inspect for the following obvious signs of mechanical and electrical damage.

VISUAL INSPECTION CHART

Mechanical
^ Damaged multifunction switch

Electrical
^ Central Junction Box (CJB) Fuse 1 (15A).
^ CJB Fuse 23 (10A).
^ Damaged wiring harness
^ Loose or corroded connections
^ Damaged electronic flasher
^ Damaged turn signal/hazard lamp

3. If the concern is not visually evident, determine the symptom and proceed to Symptom Chart. Symptom Related Diagnostic Procedures