Occupant Restraint System

Supercab:

Occupant Restraint System Component Locations - Buckles

The SuperCab safety belt components consist of:
- outboard front seat safety belt retractor with adjustable D-rings.
- center front seat safety belt tongue and buckle (with 60/40 split bench).
- passenger side front seat safety belt buckle.
- driver side front seat safety belt buckle.
- outboard rear seat safety belt retractor (if equipped with rear seat).
- outboard rear seat safety belt buckles (if equipped with rear seat).
- center rear seat safety belt tongue and buckle (if equipped with rear seat).

Regular Cab:

Occupant Restraint System Component Locations - Retractors and Tongues, Regular Cab

The outboard safety belt for the front and rear seats is a continuous-loop three-point system. The combination lap and shoulder belt (continuous-loop) uses a common slip tongue.

The shoulder harness retractor is designed to let the webbing move freely in or out at all times, except during vehicle hard braking, hard cornering or an impact of 8 km/h (5 mph) or more, when it is automatically locked by a mechanically actuated inertia sensor.