Cylinder Block Assembly: Specifications
| Cylinder Bore - Diameter | Surface Finish (RMS) | 0.2 - 0.6 Micron (micron) |
| Out-of-Round Limit | 0.0006 Inch (in) | |
| Out-of-Round Service Limit | 0.00079 Inch (in) | |
| Taper Service Limit | 0.00023 Inch (in) | |
| Main Bearing Bore Diameter | 2.85 - 2.851 Inch (in) | |
| Cylinder Bore Diameter | Grade 1 | 90.200 - 90.210 Millimeter (mm) |
| Grade 2 | 90.210 - 90.220 Millimeter (mm) | |
| Grade 3 | 90.220 - 90.230 Millimeter (mm) |