SuperCab

Safety Belt Bolt Bit:

SPECIAL SERVICE TOOL(S)

REMOVAL







1. Remove the shoulder strap guide.
1 Position the shoulder strap guide cover up.
2 Use the Seat Belt Bolt Bit to remove the bolt.
3 Remove the shoulder strap guide.
2. Remove the rear seat.
3. Remove the rear seat back upper moulding.







4. Remove the safety belt anchor.
1 Use the Seat Belt Bolt Bit to remove the bolt.
2 Remove the safety belt anchor.
5. Remove the front door scuff plate and the rear center trim panel.







6. Remove the safety belt retractor.
1 Use the Seat Belt Bolt Bit to remove the bolt.
2 Remove the safety belt retractor.

INSTALLATION

















1. Follow the removal procedure in reverse order.

NOTE:
^ Make sure the safety belt webbing is not twisted prior to installation.
^ Make sure to tighten bolts to specification.

2. Check the restraint system for correct operation.