Engine Oil Leaks
Engine Oil LeaksNOTE: When diagnosing engine oil leaks, the source and location of the leak must be positively identified prior to repair.
Prior to carrying out this procedure, clean all sealing surface areas with a suitable solvent to remove all traces of oil.
Engine Oil Leaks-Fluorescent Oil Additive Method
Use the 12 Volt Master UV Diagnostic Inspection Kit to carry out the following procedure for oil leak diagnosis.
1. Add gasoline engine oil dye. Use a minimum 14.8 ml (0.5 ounce) to a maximum 29.6 ml (1 ounce) of fluorescent additive to all engines. If the oil is not premixed, fluorescent additive must first be added to crankcase.
2. Run the engine for 15 minutes. Stop the engine and inspect all seal and gasket areas for leaks using the 12 Volt Master UV Diagnostic Inspection Kit. A clear bright yellow or orange area will identify the leak. For extremely small leaks, several hours may be required for the leak to appear.
Leakage Points-Underhood
Examine the following areas for oil leakage:
^ valve cover gaskets
^ intake manifold gaskets
^ cylinder head gaskets
^ oil bypass filter
^ oil filter adapter
^ engine front cover
^ oil filter adapter and filter body
^ oil level indicator tube connection
^ oil pressure sensor