Operation CHARM: Car repair manuals for everyone.

M - V

ACRONYMS AND DEFINITIONS

NOTE: This Acronyms and Definitions listing contains technical terms applicable to Ford Motor Company products. It is not intended to be an all-inclusive dictionary of components and their functions. If a detailed description of a particular system or component is desired, refer to the applicable Vehicle System for the specific vehicle being serviced.

M-85: Fuel containing 85% methanol alcohol.

MAF: Mass Air Flow. Used to measure the mass (weight) of the air entering the engine.

MAF RTN: Mass Air Flow Return. A return circuit for the MAF sensor.

MAP: Manifold Absolute Pressure. The internal pressure of the intake manifold.

MFC: Medium Fan Control.

MFI: Multiport Fuel Injection. A fuel-delivery system in which each cylinder is individually fueled.

MFP: Modulated Fuel Pump.

Microprocessor: A digital processor on a chip which perform arithmetic and control logic.

MIL: Malfunction Indicator Lamp. An indicator lamp alerting the driver of an emission related malfunction. May also read "CHECK ENGINE" or "SERVICE ENGINE SOON."

MISF: Misfire. Any event in the cylinder that causes a sudden change in acceleration of the crankshaft.

MON: Motor Octane Number.

Monolithic Substrate: The ceramic honeycomb structure used in the catalytic converter.

MSOF: Manual Shift-on-the-Fly.

MY: Model Year.

NA: Naturally Aspirated. Engine that is not supercharged or turbocharged.

NAAO: North American Automotive Operations.

NC: Normally Closed.

NG: Natural Gas. A system capable of using natural gas for vehicle operation.

NGS: New Generation STAR (Self-Test Automatic Readout) tester.

NGVM: Natural Gas Vehicle Module.

NO: Norm ally Open.

NO(x): Oxides of Nitrogen. Formed at high combustion temperatures.

NVH: Noise, Vibration, Harshness. A classification of vehicle concerns.

OASIS: On-Line Automotive Service Information System.

OBD, OBD-II: On-Board Diagnostics, On-Board Diagnostics Second Generation. A system that monitors PCM input and output control signals.

On Demand Test: Technician initiated "KOEO" and "KOER" tests performed by the PCM.

OC: Oxidation Catalytic converter. A catalytic converter system that reduces levels of HC and CO.

OCT ADJ: Octane Adjust. Compensating strategy that adjusts for changes in fuel octane.

OEM: Original Equipment Manufacturer.

OHC: OverHead Cam. An engine configuration that uses a single camshaft positioned above the valves.

OWL: Overheat Warning Lamp or its signal output from the PCM. Turns the TEMP warning lamp ON when engine oil temperature exceeds safe limits.

Open Circuit: A circuit which does not provide a complete path for flow of current.

OL: Open Loop. An operating condition based on instructions not modified by PCM feedback.

O(2)S 11/12/21/22: Oxygen Sensor and its relative position in the exhaust system. Detects oxygen content in exhaust gasses.

OSC: Output State Control.

OSS: Output Shaft Speed.

Ozone: A blue gaseous form of oxygen (O(3)) formed naturally by electric discharge or exposure to ultraviolet radiation.

Particulate: Small solid matter found in exhaust gases, especially prevalent in diesel engines.

PATS: Passive Anti-Theft System.

PATSIL: Passive Anti-Theft System Indicator Light.

PATSIN: Passive Anti-Theft System Receive Signal.

PATSOUT: Passive Anti-Theft System Transmit Signal.

PATSTRT: Passive Anti-Theft System Starter Relay Control

PCM: Powertrain Control Module. Formerly known as the EEC (Electronic Engine Control) Processor.

PCV: Positive Crankcase Ventilation. A system which allows the controlled flow of crankcase vapors into the combustion chamber.

PF: Purge Flow. Amount of fuel vapor burned in the engine.

Photochemical: Term describing the action of light on air pollutants which results in creating smog.

PID: Parameter Identifier. Identifies an address in PCM memory which contains operating information.

Powertrain: Engine and transmission/transaxle components.

Pressure - Absolute: A pressure referenced to a perfect vacuum.

Pressure - Atmospheric: The pressure of the surrounding air at any given temperature and altitude. Sometimes called Barometric Pressure.

Pressure - Barometric: Pertaining to atmospheric pressure or the results obtained by a barometer.

Pressure - Differential: The pressure difference between two regions, such as between the intake manifold and atmospheric pressure.

Pressure - Gage: The amount by which absolute pressure exceeds the ambient atmospheric pressure.

PIP: Profile Ignition Pickup. Provides crankshaft position information for ignition synchronization.

Potentiometer: An adjustable resistance component commonly used as a sensor (Example: TP Sensor).

PPM: Parts Per Million. A measure used in emission analysis.

PROM: Programmable Read-Only Memory. Similar to ROM except without program instructions.

Protocol: A set of rules for the exchange of information on a network.

PSOM: Programmable Speedometer/Odometer Module. A module that processes vehicle speed information.

PSP: Power Steering Pressure. Indicates the pressure in the power steering system.

PSP V: Power Steering Pressure Input Voltage.

PTEC: Powertrain Electronic Controller.

PTO: Power Take-Off.

PW: Pulse Width. The length of time an actuator, such as a fuel injector, remains energized.

PWM: Pulse Width Modulation. Controls the intensity of an output by varying the signal duty cycle.

PWR GND: Power Ground. The main ground circuit in the EEC system.

Quick Test: A series of diagnostic tests of the EEC system consisting of KOEO, KOER and Continuous Memory Self-Tests. Results are displayed as a series of DTCs.

RABS: Rear Antilock Brake System.

RAM: Random Access Memory. Memory into which information can be written as well as read.

REDOX: Reduction Oxidation Catalytic converter. A catalytic converter system designed to operate at high temperatures.

Regulator: Controls the alternator/generator field current to maintain proper battery charge. Contained within the PCM in smart charging applications.

Relay: An electromechanical device in which connections in one circuit are opened or closed by changes in another circuit.

REM: Rear Electronic Module.

Repetitive Spark: Multiple firings of individual spark plugs at engine speeds below 1000 RPM to improve idle quality and improve emissions.

RF: Radio Frequency.

RFI: Radio Frequency Interference.

RFS: Returnless Fuel System.

RM: Relay Module. A module containing two or more relays.

ROM: Read-Only Memory. Computer memory that can be accessed and utilized, but not altered.

RON: Research Octane Number.

Routine: A group of related tasks, such as a series of diagnostic tests.

RPM: Revolutions Per Minute.

RS: Reverse Switch.

RTN: Return. A dedicated sensor ground circuit.

RWD: Rear Wheel Drive.

SAE: Society of Automotive Engineers.

SBS: Supercharger Bypass Solenoid or its signal output from the PCM.

SC: Supercharged or Supercharger.

SCB: Supercharger Bypass Control. A system that allows manifold vacuum to be bled away from the supercharger wastegate actuator to allow for maximum boost.

SCBF: Supercharger Bypass Control Fault. Identifies whether a fault exists in the Supercharger Bypass circuit.

SCICP: Supercharger Intercooler Pump Control.

SCICPF: Supercharger Intercooler Pump Control Fault.

SCIPC: The PID to monitor the operation of the Supercharger and Charge Air Cooler pump.

SCP: Standard Corporate Protocol.

Self- Test: See Quick Test.

Sensor: A device that detects the value or change in a physical quantity, such as temperature, pressure or flow rate, and converts the data into an electrical signal.

SFI: Sequential Multi port Fuel Injection. A multiport fuel delivery system where each injector is individually energized and timed relative to its cylinder intake event.

Shield: A conducting sleeve that surrounds wires to be electronically isolated from Electromagnetic Interference (EMI).

Short Circuit: An undesirable condition in a circuit where it is terminated at a point other than that intended.

SHRT FT: Short-Term Fuel Trim. Fuel flow adjustment in response to the HO2S sensor(s) input during closed-loop operation.

SIG RTN: Signal Return. A dedicated sensor ground circuit that is common to two or more sensors.

SIL: Shift Indicator Lamp.

Smart Driver: A PCM or ECU output driver that can detect faults (open or shorts) on its output circuit.

SME: Society of Manufacturing Engineers.

SOF: Shift-On-the-Fly.

SOHC: Single Overhead Cam.

Solenoid: A device consisting of an electrical coil which produces a magnetic field in a plunger and pulled to a central position.

ST: Scan Tool. A device that interfaces with and communicates information on a data link.

Stoichiometry: An air/fuel mixture that is neither too rich nor too lean. Stoichiometric ratio is 14.7 parts of air for every 1 part of fuel.

Switch: A device for making, breaking, or changing the connections in an electrical circuit.

TA: Traction Assist.

TACH: Tachometer.

TB: Throttle Body. A device that controls airflow through the engine via a butterfly valve, and has an air bypass channel around the throttle plate.

TC: 1. Traction Control. Combines anti-lock braking and axle torque reduction to control wheel slippage. 2. Turbocharger.

TDC: Top Dead Center.

Tear Tag: The two-piece adhesive label attached to the PCM to identify its calibration.

Thermistor: A temperature dependent resistor, like that used in CHT and ECT sensors.

Timing: Relationship between spark plug firing and piston position expressed in crankshaft degrees before (BTDC) or after (ATDC) top dead center of the compression stroke.

TMAP: Thermal Manifold Absolute Pressure Sensor. A MAP Sensor that includes a thermistor to measure intake air temperature.

TP: Throttle Position (sensor). A three-wire potentiometer that provides throttle angle and rate information for the PCM.

TP V: Throttle Position Sensor Voltage.

Transducer: A device that receives energy from one medium and transfers it to another. For example, thermal energy is converted to an electrical signal through a temperature probe.


Transmissions/Transaxles:

NOTE: All related items are grouped under the general heading "TRANSMISSIONS" located at the end.

TSB: Technical Service Bulletin. Notifies service personnel of any known vehicle concerns, procedures, or general service information.

Underspeed Mode: A control mode that prevents the engine from stalling in the event it stumbles while running. Also used during engine crank.

Vacuum: Manifold pressure that is reduced below the ambient atmospheric pressure.

Variable Reluctance: A process of passing a varying magnetic field through wire windings and inducing a voltage.

VCT: Variable Camshaft Timing.

VECI: Vehicle Emission Control Information label.

VIN: Vehicle Identification Number. A unique identification number given to every vehicle produced. Includes information about the year, model, engine, and plant origin of the vehicle.

VMV: Vapor Management Valve. Controls the flow of fuel vapors out of the carbon canister.

VOM: Volt-Ohm Meter. Readings are indicated by sweep hand on a printed scale rather than a digital (DVOM) display.

VPWR: Vehicle Power. A switched circuit that provides power to the EEC system. Compare "Battery Voltage

VREF: Reference Voltage. A dedicated circuit that provides approximately a 5.0 volt signal used as a reference by certain sensors.

WAC: Wide Open Throttle A/C Cut-off. Turns A/C system off during wide open throttle or certain other operating conditions.

Wastegate Control: A device that opens the wastegate in case of overboost from a turbocharger.

WOT: Wide Open Throttle. A condition of maximum airflow through the throttle body.

Zip Tube: Another name for "fresh air duct" or "air inlet duct".

TRANSMISSIONS:

NOTE: The transmission naming convention is as follows:

^ The first character, a number, is the number of forward gears.
^ The second character, either the letter "F" or "R," represents front (transaxle) or rear (transmission) wheel drive.
^ The next set of characters, a grouping of numbers, represents the design torque capacity of the transmission/transaxle (for example, "27" represents 270ft./lbs. in the 4F27E transaxle).
^ The last character, if used, is one of the following:
^ "E" for electronic shift
^ "N" for non-synchronous shift
^ "S" for synchronous shift
^ "W" for wide ratio
^ 4F27E: Also known as the FN Focus automatic transmission.
^ 4F44E: Formerly known as the CD4E.
^ 4F46S: Formerly known as the Ax45 and regular-duty AXOD-E.
^ 4F50N: Formerly known as the Ax4N and heavy-duty AXOD-E.
^ 4R44E: Formerly known as A4LD for 3.0L applications.
^ 4R55E: Formerly known as A4LD for 4.0L applications.
^ 4R70W: Formerly known as AOD-E.
^ 4R100: Formerly known as E4OD.
^ 5R44E: Formerly known as A5LD for 3.0L applications.
^ 5R55E: Formerly known as A5LD for 4.0L applications.
^ 5R55N: Lincoln LS automatic transmission.
^ 5R55W: Wide-ratio truck transmission.
^ 4x4L: 4x4 Low.
^ A/T: Automatic Transmission.
^ CCS: Coast Clutch Solenoid.
^ CCSF: Coast Clutch Solenoid Fault. Displays a YES if fault exists.
^ EPC: Electronic Pressure Control.
^ EPCV: Electronic Pressure Control Volts.
^ ESS: Electronic Shift Scheduling.
^ HCDSS: High Clutch Drum Speed Sensor. PCM input from the 4R44E and 4R55E.
^ M5OD: Manual 5-Speed transmission with overdrive (RWD).
^ M/T: Manual Transmission/Transaxle.
^ NPS: Neutral Pressure Switch or its signal input to the PCM.
^ OCS: Overdrive Cancel Switch.
^ OSS: Output Shaft Speed. Indicates rotational speed of the transmission output shaft.
^ PNP: Park/Neutral Position switch. Also known as Neutral Drive Switch (NDS), Neutral Gear Switch (NGS), and Transmission Switch Neutral (TSN).
^ REVERSE or REV: Transmission Reverse Switch Input.
^ SIL: Shift Indicator Lamp. A lamp that indicates the preferred shift points on select manual transmission/transaxle vehicles.
^ S91/SS2/SS3: Shift solenoids. Devices that control the shifting in an automatic transmission.
^ TCC: Torque Converter Clutch. When energized, causes a mechanical engagement and disengagement of the Torque Converter Clutch.
^ TCIL: Transmission Control Indicator Lamp. Indicates that the Transmission Control Switch (TCS) has been activated.
^ TCS: Transmission Control Switch. Modifies the operation of electronically controlled transmissions.
^ Torque converter: A device which by its design multiplies the torque in a fluid coupling between an engine and transmission/transaxle.
^ TFT: Transmission Fluid Temperature. Indicates temperature of transmission fluid.
^ Transaxle: A device consisting of a transmission and axle drive gears assembled in the same case. Front-wheel drive applications.
^ Transmission: A device which selectively increases or decreases the ratio of relative rotation between its input and output shafts. Rear-wheel drive applications.
^ TR: Transmission Range. The range in which the transmission is operating.
^ TR Sensor: Formerly known as Manual Lever Position Sensor (MLPS). Provides information to the PCM on the transmission range selector position.
^ TR V: Transmission Range Voltage.
^ TSS: Turbine Shaft Speed. Indicates rotational speed of the transmission turbine shaft.
^ VSS: Vehicle Speed Sensor. A magnetic pickup device that generates an AC signal that is proportional to vehicle speed.