Front Bumper: Service and Repair
BUMPER - FRONT, EXPEDITIONRemoval
1. Raise and support the vehicle.
2. Remove the splash shield pin-type retainers.
3. If equipped, disconnect the two fog lamp electrical connectors.
4. Support the front bumper (17757).
5. NOTE: Two technicians are required to remove the front bumper.
Remove the front bumper.
1 Remove the nuts.
2 Remove the front bumper.
6. If necessary, remove the fog lamps.
1 Remove the six screws (three on each side).
2 Remove the fog lamps.
Installation
1. To install, reverse the removal procedure.