Bench Seat

Torx Bit Tool Set Used For T55 "Torx Plus" Bit:

SPECIAL TOOL(S)

REMOVAL
1. Remove the utility tray, if necessary.







2. Remove the safety belt buckle bolts.
1 Use the T-55 Torx bit to remove the LH safety belt buckle bolt.
2 Disconnect the safety belt warning indicator switch connector.
3 Use the T-55 Torx bit to remove the RH safety belt buckle bolt.







3. Remove the safety belt buckles.
1 Remove the LH safety belt buckle.
2 Remove the RH safety belt buckle.

INSTALLATION







1. Follow the removal procedure in reverse order.

NOTE:
^ Make sure the safety belt webbing is not twisted prior to installation.
^ Make sure to tighten bolts to specification.

2. Check the restraint system for correct operation.