C-Pillar Trim Panel

Safety Belt Bolt Bit:

SPECIAL TOOL(S)

REMOVAL
1. Remove the B-pillar trim panel.
2. Fold down the rear seat.







3. From behind the front shoulder safety belt guide cover, release the retaining tab and open the cover.

NOTE:
- Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or if it does not remain closed, install a new shoulder safety belt guide cover.
- Shoulder safety belt guide cover shown removed for clarity.







4. Remove the nut and shoulder safety belt guide.
5. Position the carpet aside.







6. Remove the safety belt anchor trim cover.







7. Remove the rear safety belt anchor nut.







8. Remove the roof trim panel.







9. Remove the six luggage compartment back lower trim cover screws.







10. Remove the luggage compartment back lower trim cover.
- Remove the six pin-type retainers.







11. Remove the pin-type retainer from C-pillar trim panel.
12. Remove the safety belt anchor trim cover.







13. Remove the C-pillar trim panel.
- Feed the safety belt webbing through the opening.

INSTALLATION
1. To install, reverse the removal procedure.