Without Side Air Bag

DISASSEMBLY

All seats
1. Remove the seat backrest.

Seats with head restraint







2. Remove the head restraint.
1 Press the head restraint release button.
2 Remove the head restraint.

All seats







3. Unhook the seat backrest trim cover J-clip.

WARNING: FRONT SEAT BACK TRIM COVERS INSTALLED ON SEATS EQUIPPED WITH SIDE AIR BAGS CANNOT BE REPAIRED. THEY ARE TO BE REPLACED (CLEANING IS PERMISSIBLE).







4. Remove the seat backrest trim cover swing rods.
1 Remove and discard the hog rings.
2 Remove the seat backrest trim cover cushion swing rods.







5. Roll the seat backrest trim cover to the top row of hog rings.







6. Remove and discard the hog rings.
7. Finish inverting the seat backrest trim cover.







8. Unhook the seat backrest foam J-clip.

Seats with head restraint







9. Remove the head restraint guide sleeves.
1 Position the seat backrest cushion to gain access to the head restraint guide sleeves.
2 Press the head restraint guide sleeve tabs.
3 Remove the head restraint guide sleeve.
- Remove the head restraint guide sleeves from the seat backrest trim cover and inspect them for damage.

NOTE: Removing the head restraint guide sleeves will also remove the seat backrest trim cover and the seat backrest foam.


Seats with lumbar







10. Remove the wire tie.







11. Remove the lumbar support adjuster.

ASSEMBLY

Seats with lumbar







1. Install the lumbar support adjuster.







2. Install the wire tie.

All seats
3. Position the seat backrest foam on the seat backrest frame.

Seats with head restraint







4. Install the head restraint guide sleeves.

NOTE: The head restraint guide sleeves are keyed; make sure they are aligned with the seat backrest frame and the head restraint guide bars before installing them in the seat backrest trim cover.

All seats







5. Hook the seat backrest foam J-clip.







6. Unroll the seat backrest trim cover to the top row of hog rings.







7. Install the hog rings.







8. Install the seat backrest trim cover swing rods.
1 Position the seat backrest trim cover swing rods.
2 Install the hog rings.







9. Hook the seat backrest trim cover J-clip.

Seats with head restraint







10. If equipped, install the head restraint.
1 Press the head restraint release button.
2 Install the head restraint.

All seats
11. Install the seat backrest.