Seat Control Switch - Without Side Air Bag

REMOVAL
1. Remove the front seat.







2. Remove the lumbar control knob, if equipped.







3. Disconnect the power seat switch electrical connector.







4. Remove the front seat cushion side shield rear screw.







5. Remove the front seat cushion side shield screws.







6. Disconnect the front seat cushion side shield.

CAUTION: Use care when disconnecting the seat cushion side shield from the seat cushion frame so the tabs on the seat cushion side shield are not damaged.







7. Remove the front seat cushion side shield.







8. Remove the 6-way power seat switch.
- Remove the screws, then remove the 6-way power seat switch.

INSTALLATION
1. To install, reverse the removal procedure.