Windshield Washer Pump: Service and Repair

REMOVAL
1. Remove the engine air cleaner.







2. Remove the windshield wiper reservoir fasteners.
1 Remove the two screws.
2 Remove the two nuts







3. Disconnect the windshield washer reservoir pump electrical connector.
4. Disconnect the windshield washer hose from the windshield washer pump and plug the outlet of the pump.

WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL, WHICH IS POISONOUS. OBSERVE ALL CAUTIONS AND WARNINGS INDICATED ON THE LABEL OF THE WASHER SOLUTION CONTAINER.

5. Disconnect the coolant overflow hose from the engine coolant overflow reservoir and plug the outlet of the reservoir







6. Remove the windshield washer pump.

NOTE: Make sure not to damage the rubber grommet during disassembly.

INSTALLATION
1. To install, reverse the removal procedure.