Second Row, 20 Percent

REAR SEAT - SECOND ROW, 20 PERCENT

REMOVAL
1. Fold both 40 percent seats up to the E-Z entry position.







2. Remove the right side seat-to-floor bolt covers.







3. Remove the right side seat-to-floor bolts.







4. Remove the left side seat-to-floor bolt cover.







5. Remove the left side seat-to-floor bolt.
6. Fold the seats down to normal seating position.







7. CAUTION: Use a screwdriver to pry beneath the attaching metal clips.

Remove the 20 percent front and rear seat-to-floor bolt covers (front shown).







8. Remove the front seat-to-floor bolts.
9. Fold both 40 percent seats up to the E-Z entry position.







10. Remove the left rear bolt and then the right rear bolt.
11. Remove the 20 percent seat from the vehicle.

INSTALLATION
1. To install, reverse the removal procedure.
- Install the fasteners as follows:
- Install the right rear bolt.
- Install the left rear bolt.
- Install the two front bolts.
- Install the side (3) shoulder bolts (note, shoulder bolts do not tighten to seat brackets).

2. Check the active restraint system for correct operation.