Front Fender: Service and Repair
FENDERRemoval
1. Support the hood using a prop rod.
2. Disconnect the hood lift (16C826).
3. Remove the headlights and turn signals.
4. Remove the screws at the lower edge of the front fender (16006) securing the splash shield.
5. Remove the running board, if so equipped.
6. Remove the pushpins at the rear lower edge of the front fender.
7. Remove the bolts securing the lower rear of the front fender.
8. Remove the fender-to-radiator grille opening support retaining bolts.
9. Remove the fender-to-radiator support retaining screws.
10. Open the door, then remove the fender retaining bolts.
11. Remove the upper fender retaining bolts.
12. Remove the hood support bolt.
13. Remove the front fender.
Installation
1. Follow the removal procedure in reverse order.