90000 MI or 144000 KM

Lubricate
    Wheel Bearing
      Special Operating Conditions "T", "I" & "O" Lubricate 4x2 and 4X4 wheel bearings, replace grease seals, and adjust bearings (if not sealed bearings).
    Control Arm
      If using Special Operating Conditions I. Refer to Special Operating Conditions (Read This First). Lube front lower control arm and steering linkage ball joints with zerk fittings, if equipped.
Inspect
    Vehicle
      Perform Multi-Point Inspection (Recommended by Ford) Refer to Routine Service.
    Steering and Suspension
      Inspect and lubricate steering linkage.
    Heat Shield, Exhaust
    Exhaust System
    Drive/Propeller Shaft
      If equipped.
    Cooling System
      Inspect cooling system and hoses.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake lines and hoses, and parking brake system for all operating Conditions.
    Ball Joint
      Inspect and lubricate 4x2 ball joints.
Replace
    Oil Filter, Engine
      Replace oil filter under all operating conditions.
    Fuel Filter
      Replace fuel filter. All Operating Conditions.
    Fluid - M/T
      If using Special Operating Conditions T. Refer to Special Operating Conditions (Read This First). Replace manual transmission fluid.
    Fluid - A/T
      Operating Conditions T, I, D and O only.
    Engine Oil
      Replace oil under all operating conditions.
    Air Filter Element
       If using Special Operating Conditions D. Refer to Special Operating Conditions (Read This First). Replace engine air filter.
Rotate
    Tires