Air Cleaner Housing: Service and Repair
AIR CLEANERREMOVAL
1. Detach the air cleaner dirty air inlet tube from the plastic seal on the radiator support.
2. Disconnect the air cleaner housing.
1 Remove the air cleaner housing screws at the cowl and the radiator support.
2 Loosen the air cleaner outlet tube clamp. Remove the outlet tube from the air cleaner housing.
3. Reposition the air cleaner housing and disconnect the mass airflow (MAF) sensor electrical connector.
4. Disconnect the two vent hoses from the air cleaner outlet tube.
5. Loosen the air cleaner outlet tube clamp at the throttle body and remove the air cleaner outlet tube.
INSTALLATION
1. To install, reverse the removal procedure.