Preliminary Inspection

Preliminary Inspection
The following items must be checked prior to beginning the diagnostic procedure:

Know/Understand the Concern
In order to diagnose a concern correctly, you must first understand the customer complaint or condition. Customer contact may be required in order for the technician to begin to verify the concern. You must also understand the conditions when the concern occurs, for example:
^ Hot or cold vehicle temperature
^ Hot or cold ambient temperature
^ Vehicle driving conditions

After understanding when and how the concern occurs, proceed to Verify the Condition.

Verify the Condition
This section provides information that must be used in both determining the actual cause of customer concerns and carrying out the appropriate procedures.

The following procedures must be used when verifying customer concerns for the transmission:

Determine Customer Concern

NOTE: Some transmission conditions can cause engine concerns. An electronic pressure control short circuit can cause engine misfiring. The torque converter clutch not disengaging will stall the engine.

Determine customer concerns relative to vehicle use and dependent driving conditions, paying attention to the following items:
^ Hot or cold vehicle operating temperature.
^ Hot or cold ambient temperatures.
^ Type of terrain.
^ Vehicle loaded/unloaded.
^ City/highway driving.
^ Upshift.
^ Downshift.
^ Coasting.
^ Engagement.
^ Noise/vibration-check for dependencies, either rpm dependent, vehicle speed dependent, shift dependent, gear dependent, range dependent, or temperature dependent.