Trunk / Liftgate Handle: Service and Repair
LIFTGATE RELEASE HANDLE - FINISH PANELREMOVAL
1. Remove the liftgate trim panel.
2. Remove the six nuts.
3. Release the lock cylinder rod.
4. Release the liftgate release handle actuating rod.
1 Open the locking clip.
2 Release the rod.
5. Remove the exterior liftgate release handle and finish panel.
6. Remove the liftgate lock cylinder.
1 Remove the locking clip.
2 Remove the lock cylinder.
INSTALLATION
1. NOTE: Transfer parts as necessary.
To install, reverse the removal procedure.