Flywheel Check

Flywheel Check

1. CAUTION: Do not use petroleum based cleaning solutions.

NOTE: Always inspect the flywheel whenever the clutch is removed or installed new.

Using a suitable cleaning solution, clean the flywheel clutch surface.
2. Inspect the flywheel for:
^ surface cracks.
^ heat check.
^ glazing. scoring. scratches or grooves. 1 For minor damage, finish the flywheel surface with coarse emery cloth or with a fine grade (400 grit) sandpaper. To polish the surface, stroke parallel to the machine lines.
3. Inspect the ring gear for:
^ worn, chopped or broken teeth.