Test A: Control Solenoids
Test A1-A5:
Test A6-A8:
PINPOINT TEST A: CONTROL SOLENOIDS
NOTE: Refer to the Transmission Vehicle Harness Connector illustration preceding these pinpoint tests.
NOTE: Refer to the Internal Harness Connector illustration preceding these pinpoint tests.
NOTE: Read and record all DTC's. All TR position Sensor and VSS DTC's must be repaired before entering Output State Control (OSC)-Service Bay Mode.
NOTE: Use the PID Chart for available diagnostic PIDs. Refer to Output State Control (OSC) Mode Torqshift - Automatic Transmission