Acceleration Control

ACCELERATION CONTROL

WARNING: Make sure surrounding components such as wiring, hoses, sound insulation and floor carpeting are not contacting the sliding inner cable of the accelerator cable or the accelerator pedal and shaft. Failure to follow these instructions may result in personal injury.

CAUTION:
- The accelerator pedal and shaft should travel smoothly from idle to wide-open throttle positions. Hesitation on return or prevention of return to the idle position must not occur.
- The sliding inner member of the accelerator cable should not be lubricated and is not repairable.

The acceleration controls consist of the pedal and shaft assembly, accelerator cable and the accelerator cable bracket.

The throttle is controlled by an accelerator cable attached to the accelerator pedal and shaft.