Test P: LFC 51/DTC B2435 - Driver Safety Belt Buckle Switch Resistance Out of Range

PINPOINT TEST P: LFC 51/DTC B2435 - DRIVER SAFETY BELT BUCKLE SWITCH RESISTANCE OUT OF RANGE

P1-P2:

P3-P5:

Normal Operation
The restraints control module (RCM) checks the driver safety belt buckle switch circuits for faults. If the RCM detects a current out of range fault, it will store diagnostic trouble code (DTC) B2435 in memory and flash lamp fault code (LFC) 51 (or higher priority code if 1 exists) on the air bag indicator.

Possible Causes
A driver safety belt buckle switch current out of range fault can be caused by:
- damaged wiring, terminals or connectors.
- a faulty driver safety belt buckle and pretensioner assembly.
- RCM is faulted.