Rear Seat Cushion - 60/40, Crew Cab

REAR SEAT CUSHION - 60/40, CREW CAB

Removal and Installation
1. Remove the 60/40 percent rear seat.
2. Remove the 2 bolts from the back side of center support.
- To install, tighten to 50 Nm (37 lb-ft).

3. Separate the 40 percent seat and the 60 percent seat from the center support.
4. Remove the screw and the side latch shield.
5. Remove the screw and the cushion release handle.
6. Pry the side shield to release the 3 clips and remove the side shield.
7. Remove the 2 bolts and remove the cushion assembly.
- To install, tighten to 33 Nm (24 lb-ft).

8. Remove the bolt and remove the seat cushion latch assembly.
- To install, tighten to 25 Nm (18 lb-ft).

9. To install, reverse the removal procedure.