Brake Caliper Anchor Plate, Rear

Brake Caliper Anchor Plate

Brake Caliper Anchor Plate:

Removal and Installation
1. Remove the brake pads.
2. Remove the 2 brake caliper anchor plate bolts and the brake caliper anchor plate.
^ To install (F-250, F-350 single rear wheel caliper), tighten to 275 Nm (203 ft. lbs.).
^ To install (F-350 dual rear wheel caliper), tighten to 275 Nm (203 ft. lbs.).
^ To Install (F-450, F-550 dual rear wheel caliper), tighten to 400 Nm (295 ft. lbs.).
3. To install, reverse the removal procedure.