Rear

Rear

Stabilizer Bar and Link

Stabilizer Bar and Link:

Removal and Installation
1. Remove the 2 stabilizer link upper bolts, washers and nuts.
^ Discard the bolts and nuts.
^ To install, tighten to 70 Nm (52 ft. lbs.).
2. Remove the 2 stabilizer link lower nuts, washers and insulators.
^ Discard the nuts.
^ To install, tighten to 28 Nm (21 ft. lbs.)
3. Remove the 2 stabilizer bar links, washers and insulators.

4. Remove the 4 stabilizer bar bracket bolts, the 2 brackets and the stabilizer bar.
^ Discard the bolts.
^ To install, tighten to 40 Nm (30 ft. lbs.)
5. To install, reverse the removal procedure.