Power Steering Fluid Leak Test

Power Steering Fluid Leak Test

NOTE: This test should only be carried out if a leak in the system has not been detected during a thorough visual inspection.

1. Check the power steering fluid level. If necessary, add the specified power steering fluid.
2. Remove the power steering pump reservoir cap and tightly install the evacuation cap to the power steering pump reservoir.
3. Install the hose from the fill adapter manifold tee to the evacuation cap on the power steering pump reservoir.
4. Install the vacuum pump to the evacuation cap.
5. Using the vacuum pump, apply 68-85 kPa (20-25 in-Hg) of vacuum to the power steering system.
6. Observe the vacuum gauge for 30 seconds. If the vacuum gauge reading drops more than 3 kPa (0.88 in-Hg) a leak is present.
7. Remove the vacuum pump.

8. CAUTION: Do not hold the steering wheel at the stops for more than 3-5 seconds. Damage to the power steering pump can occur.

Start the engine. With the engine at idle, raise the power steering fluid temperature to 74-80°C (165-176°F) by rotating the steering wheel fully to the left and right several times.
9. Visually inspect the system for leaks. If a leak is evident, repair as necessary. If a leak is not evident, add the specified UV fluorescent tracer dye to the power steering fluid. Use 14.78 mL (1/2 oz) of dye solution for every 1.89L (2 qt) of power steering fluid. For steering system fluid capacity, refer to Specifications.

10. CAUTION: Do not hold the steering wheel at the stops for more than 3-5 seconds. Damage to the power steering pump can occur.

Start the engine. With the engine at idle, raise the power steering fluid temperature to 74-80°C (165-176°F) by rotating the steering wheel fully to the left and right several times.

11. NOTE: On vehicles with rack and pinion steering gear, it may be necessary to remove the bellows boot clamp from the steering gear bellows boots to inspect for internal steering gear leaks.

Using the special tool (UV lamp), inspect the system for traces of UV dye. Repair as necessary.