Automatic Transmission/Transaxle: Adjustments
Selector Lever Cable Adjustment1. Place the selector lever in the (D) position.
2. Position the vehicle on a hoist. For additional information, refer to Maintenance/Service and Repair.
3. Disconnect the transmission selector lever cable from the manual lever.
4. Unlock the lock tab on the transmission selector lever cable.
5. Place the manual control lever in the (D) position.
^ Place the manual control lever in the 1ST gear position.
^ Move the manual control lever 3 detents to the (D) position.
6. Connect the transmission selector lever cable to the manual lever.
7. Lock the transmission selector lever cable lock tab.
8. Carefully move the selector lever from detent to detent and compare with transmission settings. Verify that the vehicle will start in PARK or NEUTRAL and backup lamps illuminate in REVERSE. If not, Steps 1-5 must be repeated and include digital TR or TR position sensor adjustment in NEUTRAL. Readjust if necessary.