Window Glass - Rear Door, SuperCrew

WINDOW GLASS - REAR DOOR, SUPERCREW

Exploded View

SuperCab:

SuperCrew:

Removal and Installation
1. Remove the rear door trim panel.
2. Remove the rear door mounted speaker
3. Remove the rear door interior moulding.
4. Remove the rear door watershield.
5. Remove the C-pillar below belt bracket bolt and bracket.
- To install, tighten to 10 Nm (89 lb-in).

6. NOTE: Some vehicles may use rivets instead of rear door window glass-to-regulator assembly bolts.

Remove the rear door window glass-to-regulator assembly bolts.
- To install, tighten to 11 Nm (8 lb-ft).

7. Remove the rear door window glass.
- Pull the rear door window glass out through the top inboard side of the door.

8. To install, reverse the removal procedure.