20 Percent

SEAT BACKREST - FRONT, 20 PERCENT

Exploded View

20 Percent Seat Backrest:

20 Percent Seat Cushion:

Bench Seat Backrest (Part 1):

Bench Seat Backrest (Part 2):

Bench Seat Cushion (Part 1):

Bench Seat Cushion (Part 2):

Bucket Seat Backrest:

Bucket Seat Cushion (Part 1):

Bucket Seat Cushion (Part 2):

Removal and Installation
1. Position the front seats forward.
2. Remove the LH trim covers.
1 Remove the pin-type retainers and the safety belt strap.
- When installing, make sure to route the safety belt through the safety belt strap.

2 Remove the 2 screws from the LH outer trim cover.
3 Release the LH inner trim cover retainers from the LH outer trim cover.
- Remove the LH inner trim cover.

4 Slide up to release and remove the LH outer trim cover.

3. Release the RH trim cover inner flap attachment tabs and open.
4. Remove the RH trim panels.
- Pull out to release the pin-type retainer and remove the RH upper trim panel.

5. Remove the latch-to-backrest bolts.
- To install, tighten to 50 Nm (37 lb-ft).

6. Remove the backrest bracket-to-backrest bolt.
- To install, tighten to 50 Nm (37 lb-ft).

7. Remove the seat backrest.
8. To install, reverse the removal procedure.
- Make sure the safety belt is not twisted prior to installation.