Test X: Exhaust Pressure (EP) Sensor
PINPOINT TEST X: EXHAUST PRESSURE (EP) SENSOR
Note:
Regeneration may occur during normal operation. During regeneration diagnostic procedures may display biased values. If a regeneration occurs during diagnostic procedures allow the process to complete before continuing diagnostics.
This pinpoint test is intended to diagnose the following:
- harness circuits: EP, SIGRTN, VREF
- EP sensor (9J460)
- powertrain control module (PCM) (12A650)
Note:
These values are absolute and reflect a 1.5% degree of accuracy
EP Sensor:
Exhaust Pressure (EP) Sensor Connector:
Powertrain Control Module-E (PCM-E) Connector:
X1-X2:
X3-X5:
X6-X8:
