Door Alignment - Rear, In and Out, SuperCab

Door Alignment - Rear, In and Out, SuperCab

1. NOTE: Left rear door shown, right rear door symmetrically opposite.

Remove the upper door strikers.





2. Remove the lower door strikers.





3. Loosen the bolts only enough to allow for slight door movement.





4. Close the doors and carefully adjust the rear door until flush with the adjacent panels.





5. Carefully open the doors and tighten the bolts.
- Tighten to 30 Nm (22 lb-ft).





6. Install and adjust the upper and lower strikers. For additional information, refer to Striker Adjustment Striker Adjustment.