Battery Tray

Battery Tray - Gasoline

1. Remove the battery. For additional information, refer to Battery - Gasoline Battery.

2. Disconnect the wire harness retainers from the battery tray and position the wire harness aside.

3. Remove the 3 bolts from the battery tray and carefully position the battery tray aside to gain access to the washer reservoir electrical connector.
- To install, tighten to 18 Nm (159 lb-in).

4. Disconnect the wire connector and washer hose from the washer bottle.
- Remove the battery tray assembly.

5. To install, reverse the removal procedure.