Battery Tray
Battery Tray
Removal and Installation
1. Remove the battery. For additional information, refer to Battery Battery.
2. Disconnect the 4 wiring harness fasteners from the battery tray.
3. Remove the 3 bolts from the battery tray.
- To install, tighten to 23 Nm (17 lb-ft).
4. Remove the battery strap nut and remove the strap.
- To install, tighten to 23 Nm (17 lb-ft).
5. Disconnect the Battery Junction Box (BJB) fastener and remove the battery tray.
6. To install, reverse the removal procedure.