Bumper - Front

Bumper - Front

Removal and Installation

1. Remove the front bumper bracket bolts (1 each side).
- To install, tighten to 48 Nm (35 lb-ft).





2. If equipped, disconnect the fog lamp electrical connector and remove from the retainer.





3. Remove the 4 front bumper retaining bolts and 2 nut plates.
- To install, tighten to 103 Nm (76 lb-ft).





4. NOTE: The aid of an assistant is required to remove the front bumper.

Remove the front bumper from the vehicle.

5. To install, reverse the removal procedure.
- Transfer components as necessary.