Fender Splash Shield

Fender Splash Shield

Removal and Installation

1. Release the wire retainers from the fender splash shield.

2. Remove the wheel and tire. For additional information, refer to Wheels and Tires.

3. Remove the 2 front fender splash shield screws.





4. Remove the 4 front fender splash shield screws from the wheel lip.





5. Remove the 2 inner fender splash shield bolts.
- To install, tighten to 9 Nm (80 lb-in).





6. Remove the fender splash shield lower rear pushpin.





7. Remove the fender splash shield.

8. To install, reverse the removal procedure.