Exterior Mirror

Exterior Mirror

Removal and Installation

NOTE: Do not remove the exterior rear view mirror assembly when repairing an individual part. Individual components can be installed without removing the exterior rear view mirror.

NOTE: The power folding mirrors may need to be synchronized when the RH, LH or both power folding mirrors are partially folded in toward the door manually, and then folded inward using the power folding mirror control switch. Refer to Exterior Mirror Motor Synchronization - Power Folding Programming and Relearning.

Manual exterior rear view mirrors

NOTE: LH mirror shown, RH mirror similar.

1. Remove the sail cover.





Power exterior rear view mirrors

2. Remove the front door trim panel.

3. Position aside the front door watershield to gain access to the exterior rear view mirror control switch electrical connector.

4. Disconnect the exterior rear view mirror control switch electrical connector.





All exterior rear view mirrors

5. Remove the exterior rear view mirror nut access covers and tape.





6. Remove the exterior rear view mirror nuts and remove the exterior rear view mirror.
- To install, tighten to 11 Nm (97 lb-in).





7. To install, reverse the removal procedure.