Trailer Brake Control Module: Service and Repair

Trailer Brake Control (TBC) Module









Removal and Installation

1. Remove the upper instrument panel center finish panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

2. NOTICE: The clips holding the coin tray/storage bin or the auxiliary switch assembly (if equipped) to the center finish panel are very stiff. Care must be taken not to damage the coin tray/storage bin, switch assembly or center finish panel during removal.

Press the 4 tabs and remove the coin tray/storage bin or the switch assembly (if equipped).





3. Remove the Trailer Brake Control (TBC) module.

4. To install, reverse the removal procedure.