Oil Life Start Value - Base Instrument Cluster (IC)

Message Center Configuration

Oil Life Start Value - Base Instrument Cluster (IC)

NOTE: All message center functions are carried out using the single stem SELECT/RESET button in the Instrument Cluster (IC).

1. Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET FOR SETUP MENU.

2. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE XXX% HOLD RESET = NEW.

3. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE SET TO XXX%.

4. NOTE: The oil life start value reduces by 10% for each second that the SELECT/RESET button is held once the oil life start value begins decreasing.

Continue to hold the SELECT/RESET button until the oil life begins to decrease in value (from 100% down to 10%), continuing to hold until the desired start value is displayed.

5. Release the SELECT/RESET button and allow the setup timer to expire to exit the procedure.