120000 MI or 192000 KM

Inspect
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness, or drag.
    Vehicle
      Recommended Multi-point Inspection
    Universal Joint, Drive/Propeller Shaft
      If equipped.
    Tie Rod End
      Inspect tie rod ends (lubricate if equipped with Zerk fittings)
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Exhaust System
      Inspect exhaust system and heat shields.
    Drive/Propeller Shaft
      If equipped.
    Drive Belt
      Follow up inspection on accessory drive belt(s).
    Cooling System
      Inspect engine cooling system concentration and hoses.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system.
    Ball Joint
      If equipped.
Replace
    Wheel Bearing
      Replace front wheel bearing grease and grease seal if non-sealed bearings are used (2WD vehicles).
    Oil Filter, Engine
    Fluid Filter - A/T
      Change automatic transmission fluid filter on all vehicles equipped with the Torqshift transmission.
    Fluid - A/T
      Replace automatic transmission fluid on all vehicles equipped with the TorqShift transmission. Consult your dealer for your particular requirements.
    Filters
      Climate-controlled seat filter
    Engine Oil
      Change engine oil and filter.
    Air Filter Element
      Replace engine air filter.
Rotate
    Tires
      Rotate tires, inspect for wear and measure tread depth.