Seat Backrest Cover - Rear, Bucket

Seat Backrest Cover - Rear, Bucket

Removal and Installation

1. Remove the RH and LH armrests from the seat. For additional information, refer to Seat Armrest- Rear, Bucket Seat Armrest - Rear, Bucket.

2. Release the J-clip at the lower edge of the backrest cover.

3. NOTICE: Use care when separating the seat backrest cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the foam pad.

Invert the backrest cover and remove.


4. To install, reverse the removal procedure.