70000 MI or 112000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Perform multi-point inspection (recommended).
    Universal Joint, Drive/Propeller Shaft
      Inspect rear axle and U-joints; lubricate if equipped with grease fittings (AWD vehicles)
    Tie Rod End
    Tie Rod Boot
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft, and U-joints; lubricate if equipped with grease fittings.
    Fluid - A/T
      Inspect automatic transmission fluid level (if equipped with dipstick).
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect engine cooling system strength and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped).
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
    Ball Joint
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft, and U-joints; lubricate if equipped with grease fittings.
Replace
    Oil Filter, Engine
    Engine Oil
      Change engine oil and filter.
    Cabin Air Filter / Purifier
      Inspect cabin air filter (if equipped). If using special conditions I, D, or P.
    Air Filter Element
      Inspect and service as required engine air filter if using Special Operating conditions D, I.
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth.