Operation CHARM: Car repair manuals for everyone.
Home >> Freightliner >> 2004 >> Sprinter 2500 L5-2.7L DSL Turbo >> Repair and Diagnosis >> Body and Frame >> Bumper >> Rear Bumper >> Service and Repair >> Body Repair Manual
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Repair Manual

Remove/install rear bumper

Remove/install




1. Bumper
2. Bolt
3. Nut
4. Screw
5. Rear-end door step

1. Remove rear bumper
2. Unscrew screw (2) with nut
3. Unscrew screw (4) and remove rear-end door step
4. Install in the reverse order


Remove/install





1 Bumper
2 Reflector
3 Phillips screws
4 Collar bolt
5 Bumper bracket
6 Corner pillar mount
9 Cable strap
10 Electrical connector

Only with code MBZ: Rear-end door step




7 Plastic clip
8 Dowel pin




1 Unscrew reflector (2) and collar bolts (4)
Installation Replace micro-encapsulated collar bolt (4)

2 Unclip bumper brackets (5) below end panel
3.1 Remove plastic clips (7) With code MBZ, rear-end door step.
Press dowel pin (8) of plastic clip (7) inward.

4 Remove bumper
Installation: The corner parts of the bumper are inserted in the mounts (6) of the corner pillars (not screwed).

5 Pince through cable strap (9)
6 Separate electrical connector (10)
7 Install in the reverse order
pro multis · About Operation CHARM