Front Seat Cushion

SEAT CUSHION - FRONT

REMOVAL

1. Disconnect and isolate battery negative cable.
2. Move seat to the foremost position.

Fig. 4:

3. On standard cushion equipped vehicles, remove the front two screws. (Fig. 4)

Fig. 5:

4. On comfort seat equipped vehicles, operate the front release lever. (Fig. 5)
5. Slide seat cushion forward and lift off the mounting points.
6. Disconnect the electrical connectors, if equipped.

INSTALLATION

1. Connect seat cushion electrical connectors, if equipped.
2. Place seat cushion onto mounting points.
3. On comfort seat equipped vehicles, slide seat cushion to the rear until the arresting mechanism latches audibly.
4. On standard cushion equipped vehicles, install the front two screws.
5. Connect battery negative cable.