Seat Back Cushion/Cover-Rear
SEAT BACK CUSHION / COVER - REARREMOVAL
1. Remove seat.
2. Remove seat back shield.
3. Remove seat belts as necessary to remove cover.
4. Remove seat belt buckles as necessary.
5. Remove the headrests.
6. Remove the headrest sleeves.
7. Partially de-trim upper seat back.
8. Remove the retaining covers at seat belt guides.
9. Route belts through guides.
10. Separate j-straps at seat back cover and remove cover/cushion.
INSTALLATION
1. Install seat back cushion and cover.
2. Connect j-straps.
3. Route belts through guides.
4. Install retaining covers at seat belt guides.
5. Position upper seat back cover back into place.
6. Install the headrest sleeves.
7. Install the headrests.
8. Install the seat belt buckles.
9. Install the seat belts.
10. Install the seat back shield.
11. Install seat.