Wheel Replacement

REMOVAL
1. Raise and support the vehicle.





2. Remove the wheel lug studs (SRW) (Fig. 24).





3. Remove the lug nuts (DRW) On vehicles with dual rear wheels do not pry off the front hub cap the lug nuts must be removed in order to remove the hub can. (Fig. 23).
4. Remove the wheel and tire assembly.

INSTALLATION
1. Install the wheel and tire assembly to the vehicle.
2. Install the wheel lug studs (SRW) (Fig. 24) and tighten to specification. See specification table for model variations.
3. Install the hub cap to the wheel then install snugly the lug nuts to hold the hub cap to the wheel (DRW) (Fig. 23).
4. Install the wheel lug nuts (DRW) and tighten to specification. See specification table for model variations.
5. Lower the vehicle.